Titty Twister
Titty Twister
We can discuss the prospect of converting the DM Titty Twister here.
Initial edit to see where things stand. Mirrored map, edited terrain in center to flatten it out. Far from perfect but playable to get an idea. Map is full of holes.
Download here
Initial edit to see where things stand. Mirrored map, edited terrain in center to flatten it out. Far from perfect but playable to get an idea. Map is full of holes.
Download here
- pooty
- Posts: 4537
- Joined: Sat Apr 03, 2021 10:22 am
- Location: Michigan
- Server Sponsor: Yes
- Server Admin: Yes
Re: Titty Twister
Okay..way cool...finally got to load it up. Inside of the bars is sweet.
And those motorcycles should get replaced with BattleBikes (even though they are kind of buggy).
I do wonder if rotating them....I'd be cool to have the junkyard (behind the bars) somehow factor into play?
And those motorcycles should get replaced with BattleBikes (even though they are kind of buggy).
I do wonder if rotating them....I'd be cool to have the junkyard (behind the bars) somehow factor into play?
Re: Titty Twister
My best idea is to put the cores down there and create some flat areas for players to spawn. Then jump pads launch you out of the pit to the ground level.
It would be a shame not to use them in some way since between the two sides it accounts for a chunk of real estate.
- pooty
- Posts: 4537
- Joined: Sat Apr 03, 2021 10:22 am
- Location: Michigan
- Server Sponsor: Yes
- Server Admin: Yes
Re: Titty Twister
Maybe put the cores there and block them off, so to get to the core, you've got to fight through the bar. Maybe not block off completely, but make it difficult to go around the bars so the battle is in there as it should be...TotalBurn wrote: ↑Tue Mar 22, 2022 4:57 pmMy best idea is to put the cores down there and create some flat areas for players to spawn. Then jump pads launch you out of the pit to the ground level.
It would be a shame not to use them in some way since between the two sides it accounts for a chunk of real estate.
- captainsnarf
- Posts: 2714
- Joined: Tue Jul 06, 2021 1:51 pm
- Location: Washington
- Server Sponsor: Yes
- Server Admin: Yes
- Contact:
Re: Titty Twister
BattleBikes! That's the first thing I thought too.pooty wrote: ↑Tue Mar 22, 2022 4:18 pm Okay..way cool...finally got to load it up. Inside of the bars is sweet.
And those motorcycles should get replaced with BattleBikes (even though they are kind of buggy).
I do wonder if rotating them....I'd be cool to have the junkyard (behind the bars) somehow factor into play?
I think leaving the junkyard as just deco is ok too. Not sure what to do with it honestly.
Thanks for putting this together TotalBurn.
Re: Titty Twister
I can see that working. The battlefield between buildings isnt very big. If we could use the space in the bar and on the sides, outside that work out well.
Mo problem! I enjoy it and it helps take up free time I otherwise dont know what to do with. Due to the complex nature of the pits/junk I think it would be better to leave em be like you said.captainsnarf wrote: ↑Tue Mar 22, 2022 8:00 pm I think leaving the junkyard as just deco is ok too. Not sure what to do with it honestly.
Thanks for putting this together TotalBurn.
I also noticed a side effect from bringing the two map halves together. The junk/pit got extended and didnt move along with everything else. So I have to go back to the first version where there was a gap in-between the two maps. Like in the first screen shot I messaged.
So this week I am going to flatten the terrain in between the two maps and add a brush to fill the gap. Here is my logic for this flat strip. If there is something flat placed on the flat area it will be logical to the eye. It wont have sharp edges or a slope. I'll raise and lower the terrain in places to make it blend into the center strip. I can even raise/lower terrain in random places near the strip so it doesnt look like a long rectangle.
So let me work on that because without the two halves meeting we have nothing to work with. Like Pistola I dont want to take away from someone else so if you have an idea how to join the halves by all means. I dont want to be toe stepping
- captainsnarf
- Posts: 2714
- Joined: Tue Jul 06, 2021 1:51 pm
- Location: Washington
- Server Sponsor: Yes
- Server Admin: Yes
- Contact:
Re: Titty Twister
On the terrain edges it seems you could make them slope down
then put a brush between them
Code: Select all
~~~\ /~~~
\ /
Code: Select all
~~~\ _______ /~~~
\ /
Re: Titty Twister
That would work perfectly!captainsnarf wrote: ↑Wed Mar 23, 2022 2:23 pm On the terrain edges it seems you could make them slope down
- captainsnarf
- Posts: 2714
- Joined: Tue Jul 06, 2021 1:51 pm
- Location: Washington
- Server Sponsor: Yes
- Server Admin: Yes
- Contact:
Re: Titty Twister
I've been trying all morning to edit this thing. It keeps crashing constantly for me. I'm not going to be able to do anything with this project.
Re: Titty Twister
Not sure why its crashing. I think the editor has a log. System\Editor.txt That might reveal whats crashing your editor. In the mean time I dont mind working on it. GuitarShop v3 is finished (not uploaded) and I think Hangar 18 just needs some containers added back to the map. So I have spare time.